The Jelly Roll Quilt

When last we met the Jelly Roll quilt, she was still a jumble of fabric pieces, thrown together in a shoebox and stirred to maximum randomness. For a re-cap, please see my earlier post about quilting. Now she's done (and has been since late April), and I finally have time to give a thorough account of her creation.

The Jelly Roll in the Wild

The quilt came together nicely. First, of course, everything had to be cut. It's amazing how all that fabric looks like so little when arranged this way. It will become a queen-size quilt.

All the Quilt Pieces, Ready to Go

The quilt was essentially made from two different size pieces: 2" x 3" and 2" x 10". The blocks were all 10" squares set at 90 degrees to each other. I pieced a 2" inner-border out of leftover scraps and added a 4" outer border mostly to achieve the desired width (which needed to be substantial).

Assembled Strips of Five

First I created pairs of 2"x3" pieces, then assembled these into 5-piece strips. All the 2"x3" pieces were stored in a shoebox that I had shaken up. With each new pair I sewed, I'd blindly reach into the box and pull out two pieces. My goal was the keep it completely random and not let my preferences for certain fabrics (which I formed early on) lead me toward using those up first (or to cause me to save them all for last, either!). I also sought to avoid sewing similar prints together (some had an identical print, just in a different color; some had larger print motifs than others), and I tried to keep like colors apart, but this was harder. Also, in each strip, I tried not to have too much of one tone (light or dark) and I tried to keep similar tones from touching. The fabric collection I was using (Park Avenue), is about 1/3 dark tones and 2/3 light, so mainly it was a matter of not using all the dark in one place. I came to realize that a lot of work goes into giving the appearance of randomess!


Each 5-piece strip was then capped off with a 10" strip. The same strategies outlined above were used here. I tried to never have the same print of fabric across the top as I had in the pieces. Amazingly, I think I rarely failed in this, if at all. Notice the small pieced section in the bottom right. Despite my best efforts, I was short two 2"x3" pieces after all my cutting, so I pieced together a couple. I am actually pretty happy with the way it looks. The idea of hiding little Easter eggs like this inside my quilt appeals to me.

Half of a Completed Block

A Completed Block

A long seam between the two 10" strips yielded a 10" square. I still have to work on my seam allowance. Many of my squares fell far short of the 10" mark (some were 9 1/2!). When you have 5 pieces in a strip, seam allowances that are too wide add up quickly. 

One Long Strip of 10" Blocks

72 of these 10" blocks went into the top of the quilt. 8 of the 72 blocks were sewn into a long strip. This allowed the math of the next bit of quilt gymnastics to come out correctly. The remaining 64 blocks became 32 pairs of blocks, each block set at a 90 rotation with respect to the other. However, it turns out that not all 90 rotations are created equal, and I had to re-sew several pairs of blocks. Each pair of blocks was then paired again to create 16 super-blocks. Then, each super-block was paired yet again.

Pairs of Super-Blocks

By this point, I was storing the assembled blocks inside my closet on a pants hanger. In the picture above you can see pairs of super blocks (which contain 8 standard blocks). These were paired off again to create mega blocks. The pairing proceeded until I had just one giant 8-block x 8-block square, to which I added the 8-block strip to yield an 8-block x 9-block top! Please enjoy the diagram below:

Figure 1: Quilt Assembly Procedure and Order of Operations

An Intimate Look at my Piecing

Then I added the two borders. Don't look too closely at my outer-border. I wasn't very careful with the bias and it was pretty much impossible to measure it properly against the quilt top (with space at a premium, where was I going to lay this down to measure?). I'm not sure if it was too long or too short, but the result is a lot of puckering.

Basted Using Safety Pins

I got some help moving the living room furniture and basted the quilt using safety pins. Getting the three layers of a queen-size quilt (top, batting, backing) to lie flat and even simultaneously is very hard, especially if (like me) you really didn't fuss about having the backing be wide enough (again, measuring was not possible). Mine barely was, and I ended up having to cut some of my outer border off (so it's only 3 inches wide on one side!). I'm not the most responsible quilter ever. Craft mavens the world over are free to ostracize me. The thing still looks magnificent.

Then I quilted, and it was so much fun! This quilt is machine quilted, but I didn't follow any pattern. For one thing, that would have meant either designing a pattern or buying a stencil and then marking the quilt top and then having enough control to keep my stitches on the pattern I'd marked. Also, at my dad's suggestion, I decided not to have a pattern that was too close, so that the fabrics and their juxtaposition could still be the main attraction.

Instead of a pattern, I just free-stitched along every seam, but I didn't worry at all about straight lines. I just did swirls and waves and spirals, following a road map that allowed me to do minimal back-tracking (however, topologists who have studied the arrangement of the pieces will understand why backtracking was utterly unavoidable).

The preceding pictures are just an example of what the entire quilt looks like. I got better and better as I learned control. In free-quilting a darning needle is used and the feed-dogs are down, so the sewer is in complete control (or not!) of stitch length and speed. My patterns got to be more interesting-looking towards the end, but there were some weird false-starts and ugly angles at the beginning. 

Around the border (which I did last!) I figured out how to do a motif of vines and leaves. At this point, I would have felt comfortable following a pattern, but I didn't feel like going out and buying a stencil.

Last but not least came the binding. This is bias-cut, double fold binding (the strongest way to bind a quilt). One side is sewn by machine, then it's folded over and blind-stitched to the back. At this point, I began using the quilt as my actual bedspread, since attaching the binding secures the entire quilt (even though I didn't complete the blind stitching until another couple of months later). 

A few miscellaneous facts:

I started this just after Christmas. The piecing took about a month working a couple of hours every night (my back and eyes wouldn't allow for more). The quilting took another couple of weeks. Sewing down the binding took about a month and a half with only intermittent work (since there was no hurry at that point).

The quilt is for a queen size bed but it has a generous drop on both sides since I have a thick mattress and I don't use a dust ruffle. There's also extra length for a "pillow tuck." All told, it's about 100" on each side, though I never did do final measurements, and I have since washed it and it shrank slightly.

Quilt Easter Egg!

Earlier I mentioned Easter eggs in my quilt. Here's one! The red rectangle is actually a fabric from my first quilt (the sampler). Luckily, the colors match nicely, but even if they didn't I would have done this. From now on, I'm going to try to use one piece of fabric from the previous quilt in the next. Perhaps I'll be able to use fabric from several previous quilts! In anticipation of this, I've already saved the piece that would have gone where this red rectangle is. It's waiting its chance to be in my next quilt...

Anna's Quilt.

Anna Bender (neè Farrow) was my great-great grandmother, whom I alluded to in my first quilting post. Thanks to my aunt Heidi, I am now in possession of some fabric pieces and a partially-sewn quilt top that were once hers (we think). Her project was originally a Double Wedding Ring pattern using a complete mish-mash of fabrics. I estimate there are several dozen different kinds of fabric being used in this quilt.

Double Wedding Ring

Some Completed Piecing Found Among the Scraps

A Wide Array of Fabrics, Ready to be Sewn

I have a bag full of these little wedge-shaped pieces. Now I need to find lavender and white muslins to round out the materials necessary to complete the job. My grandmother says not to worry too much about matching the color exactly. No matter how hard I try, it will be obvious that some blocks were completed much earlier than the others. Rather, I will try to showcase Anna's original work by constructing my own around hers. I love picking through the little pieces to discover the variety of colors and patterns represented. These fabrics are probably from the 30's and 40's, judging by the colors, print size and motifs. Currently, this era is having a resurgence of popularity among quilters and several companies have come out with fabric lines that mimic this vintage. I am delighted to have some actual decades-old fabric to work with. I can't wait to start!